“With the MONITOR ST I can finally hear my mixes they way I always wanted to.”
“The MONITOR ST is actually an education into doing it right. The guys at Dangerous obviously designed this thing from years of experience.”
Technically this is a Low Pass Filter, not a crossover, because it simply removes the midrange frequencies and above from the sub, without removing the low frequencies from the main speakers. This allows full range monitoring from the mains with or without the sub extension.… READ MORE Can I adjust the crossover / Low Pass filter?
“The MONITOR ST is actually an education in doing it right. The guys at Dangerous obviously designed this thing from years of experience.”
“The MONITOR ST is the single most valued piece of gear I have ever owned. It’s a giant asset to my studio. When I got that, it all started making sense.”
Dangerous gear does not get extremely hot. However, we always recommend leaving blank spaces anyway. More ventilation always equals longer gear life, no matter how hot or cool your gear runs. Do not rack your Dangerous gear next to very hot gear such as power… READ MORE Do I need to leave blank rack spaces above/below my gear?
No. Order a Dangerous Music TBREM from your favorite pro audio dealer if you’d like one or build it. See “How is the Talkback Remote Wired?”
“I feel like I have the Force!”
“I feel like I have brand new speakers.”
“I know my mix is 25% or so wider than it was before, and the top end is so much more defined.”
Connect the click track to the Aux inputs. Then adjust the level knob from the front of the Monitor ST rack “Aux Input to Cue” until the correct balance has been achieved.
Connect the headphone output from your computer to the Aux inputs. Then adjust the level knob from the front of the Monitor ST rack “Aux Input to Main” until the correct balance has been achieved.
There are 2 ways to do this. The simplest is to use a half-normalled connection in a patchbay to feed a meter. The second way is to make a modified cable that can be used from the ST Cue Amp out. Please see the downloads… READ MORE How do I feed meters with an ST?
Employ an inexpensive line transformer (600- 10k ohms) available at your favorite audio grocer.
Enter setup mode by holding the Setup button for 1 second. It will light up blue. Next, hold the PPI button and it will light up blue. While still holding the PPI button, press and release the LFE button, it will light up red. Now… READ MORE How do I reinitialize or return to the factory settings?
Absolutely! Go nuts, do 10.2 if you want!
The 3rd speaker output has a stereo feed for the front channels and a unique feature to switch signals for the subwoofers in the system. In Stereo mode, the Sub feeds get their signal from the front channels, output 6 having a mono combiner for… READ MORE I have one subwoofer I want to share between my main stereo set and my 5.1 set. Which Sub output should I use?
Adding a small sub mixer to the Aux Input can be a convenient way to patch and mix signals into the ST system. The mixer can set the listen back mic level (from the live room), the computer cue (headphone out) level, and still have… READ MORE I need more inputs than the Monitor ST has, what do I do?
The system is totally expandable. Add a DAC-SR and A.S.S. rack for digital inputs. All controllable from the same remote.
The purpose of the Aux is to have a separate path that is independent of the remote and can be layered with the selected input. Aux is not going to give you an exact level match to your other inputs, so if you are performing… READ MORE I’m running into the “Aux” input (XLR) and I when I turn the volume all the way down, I still hear the signal.. What’s the story?
“The Dangerous MONITOR ST is the essential piece of gear in my arsenal. I couldn’t work without it. I know that I’m hearing an accurate representation of the system output and the headphone output is the best I’ve ever heard.”
“The Dangerous Music MONITOR ST let’s me hear my mixes, it moves out of the way and let’s the vocals and music come through as it was recorded.”
“The ST is a GOD-send from Dangerous Music, I’ve put this in conjunction with my Apogee Symphony I/O and both the Focal CMS 40’s & Dynaudio BM-5A’s….NO-Coloration what so ever. Easy set-up, connectivity, you can completely trust your mix.”
There is no excerpt because this is a protected post.
There is no excerpt because this is a protected post.
“I use gear that sounds good to me. The MONITOR ST and 2-BUS LT have been great purchases for our Mix Room!”
“I like to mix at lower volumes, and with the ST even at low volumes you get all that macro, beautiful detail, which was interesting to me. I thought, ‘Wow! There’s an immediate difference!’”
“Clean transparent audio with a non-fatiguing sound, I didn’t hear any distortion, and could hear so much detail even monitoring at the lowest listening levels.”
“I did some tests where I was mixing for longer periods of time and I realized I’m not getting any ear fatigue. The DAC-ST and MONITOR ST combo has this very silky, clean presence. I don’t hear any distortion.”
“Transparency is truth to me and I feel that the MONITOR ST has revealed everything to a point where I can very-well trust it.”
“The sound of my mains improved so much using the Dangerous MONITOR versus the monitor section in the console I was using previously, it prompted me to tell everyone that we need to really get started updating our gear. I began bugging everybody that I… READ MORE Robert Vosgien
“Having the MONITOR ST and 2-BUS LT when it comes time to mix is a must. The 2-BUS LT gives me the analog sound I desire, and the MONITOR ST is by far the best monitor controller I’ve heard.”
The Monitor ST/SR employs a Low Pass Filter, not a crossover, because it simply removes the midrange frequencies and above from the sub, without removing the low frequencies from the main speakers. This allows full range monitoring from the mains with or without the sub… READ MORE Someone told me I should be using bass management. Does the Monitor ST/SR employ this? Do I need it?
The CUE AMP output provides 20 watts of amplification to feed headphone distribution boxes like the Redco Little Red Cue Box. Depending on the impedance of the headphones utilized, the CUE AMP output can handle up to 16 sets of headphones. (Based on 600 ohm… READ MORE What can I use the CUE AMP out for? Is it powered or unpowered?
11.7 (trick question). But the real answer you are looking for is “when and why do I use the Gain button?” When plugging in an unbalanced, consumer level source like a headphone computer output, iPod, DVD player, the level is low (.773 volts vs. 1.23… READ MORE What is the difference between -10dBV and +4dBu?
To add digital inputs, expand the system with the “Additional Switching System” and “DAC-ST” or “DAC-SR” depending upon the application.
The Input 4 knob is cut only. The purpose is for comparing a mastered CD with the current project at the same volume. When the knob is all the way up, the input is set at Unity.
You are hearing relays adjust the stepped attenuator inside the Monitor ST rack unit. This is a transparent, musical solution, as opposed to a VCA (voltage controlled amplification) which tends to smear the image and DCA (digitally controlled attenuation) where bit depth is degraded as… READ MORE Why does my Monitor ST make that clicking sound? Can I turn it off?
ST uses a relay-based analog stepped attenuator volume control design. An absolute value encoder at the remote transmits I2C code to the rack unit telling the relays when to change state. If the firmware detects any missed steps it places the unit into Dim to… READ MORE Why does my Remote go into Dim when I turn up the Volume Encoder?
The purpose of the Aux is to have a separate path that is independent of the remote and can be layered with the selected input. Use input 1-4 if you require the use of mute and dim.